Power Capacitors for Induction Machine/Furnace

The capacitors are applicable for indoor use and intended to be used for power factor correction in induction heating, melting, stirring or casting furnaces; also for tune special furnace circuits. The capacitance range from few micro -to several dozen millifarads.

Photos

  • Tank Capacitor for Induction Equipment

    Tank Capacitor for Induction Equipment

  • Capacitor Bank  in Induction Machine

    Capacitor Bank in Induction Machine

  • 176uF,1KHz,1.25Kv

    176uF,1KHz,1.25Kv

  • Vacumm Tank for Power Capacitor

    Vacumm Tank for Power Capacitor

  • Tank Capacitor for Induction Converter

    Tank Capacitor for Induction Converter

Secification

Dielectric MaterialPolypropylene film
Insulation LiquidNon-PCB fluid
Capacitance tolerance-5/+10%
Maximum permissible voltage  Rated voltage x 1.05 (12h per day)
Maximum permissible current Rated current x 1.15
Dissipation factor (Tanδ)Less than 0.1% (1W/kVAR)
Ambient air temperature-20/+40℃ for self-ventilated (AN) or forced ventilated (AF) -20/+50℃ for water cooled (WF)
Cooling water Inlet temperature less than 30℃
Cooling Water Outlet temperature  less than 45℃
LocationIndoor use
Case Aluminum caseSide board 2mm, Cover and Base 3mm Live or Dead case on request. 

Similar Cases

  • DC-Link  Capacitor

    DC-Link Capacitor

  • Power Capacitor

    Power Capacitor

  • Power Capacitor for Induction Furnace

    Power Capacitor for Induction Furnace

  • Power Capacitor for Melting Furnace

    Power Capacitor for Melting Furnace

  • Vacuum Tank for Tank Capacitor

    Vacuum Tank for Tank Capacitor

  • Auto Aluminum Film Winding Machine

    Auto Aluminum Film Winding Machine

  • Runtime Test Room

    Runtime Test Room

Features

1. A pressure switch can be used for external monitoring of the internal pressure. It signals 0.5 Pa of pressure rise by closing the contact, allowing for safe external disconnection in the event of overload or failure at the end of service life.

2. Power Capacitors for induction melting can be designed for the individual requirements of our customers.

3. Low dissipation factor, low-temperature rise, long service life.

4. Power Capacitors for induction heating machine have stable capacitance with little variation due to temperature.

5. Impregnated with high insulation strength and non-PCB biodegradable fluid in the vacuum tank.

6. Power Capacitors for induction Furnace are Safe, higher reliability, less installation space, lower installation, and maintenance costs.

Tel. : +86 135 4128 7190 | Email: sales@ty-induction.com
Copyright © TianYuan Induction Electric(Chengdu)Co., Ltd. All Rights Reserved | Sitemap | Technical Support: Reanod

Wechat